P12|8 Panelsaw

The all new P12  panelsaws are here, available with four sizes of sliding tables: 4′, 5′, 8′, and 10′.

P12|8 Features 102″ dumbbell sliding table design with longer body, 5 HP main motor, 3/4 HP scoring and swing-away guard.

Buy Now
Buy Online

Buy Online Find A Dealer

$ 9,999.00

SKU: MPSP12-8-0135 Categories: ,

Share this product

Description

The P12|8 was designed to clear 8-ft. material using a 12″ blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down.

The 102″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.

The European style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.

The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″).

The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.

Inside the P12|8 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame.

The heavy-duty motor is equipped with soft start to minimize initial amperage draw.

The P12/8 comes standard with hold-down clamp, rip shoe, and push handle.

  • Motor: 5HP Main
  • Motor: 3/4 HP Scoring
  • Volt: 220, 1 phase, 60 Hz.
  • Blade Capacity: 12″, 14″/300mm, 355mm
  • Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
  • Max Scoring Blade: 4 3/4″/120mm
  • Scoring Adjustment: T-Handle through Cast Top
  • Arbor: 30mm Main, 20mm Scoring
  • Max Cutting Height 90° 14″/355mm Blade: 4 1/2″/115mm
  • Max Cutting Height 90° 16″/400mm Blade:5 1/8″/130mm
  • Max Cutting Height 45° 14″/355mm Blade: 2 3/4″/70mm
  • Max Cutting Height 45° 16″/400mm Blade: 3 1/2″/90mm
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4.75″/120mm
  • Dust Collection Port Guard: 4″/ 100mm
  • Sliding Table: 102.36″/2600mm
  • Sliding Table Width: 14.88″/378mm
  • Main Cast Table: 21 1/2″ x 35 1/4″
  • Rip Fence: 51″/1300mm
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1 5/8″/40mm  Solid Steel Micro Polished
  • Overhead Guard with Swing-Away
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32″ x 12″ Steel Extension Table: Included
  • Crosscut Fence 2 x Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Fence Max. Collapsed: 77″
  • Crosscut Fence Max. Extended: 140″
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Ship Dimensions Body: 83″ x 47″ x 46″
  • Ship Dimensions Table: 137″ x 20″ x 15″
  • Weight (Net/Ship): 1815/2112 lbs

Manual

pdfP12|8

Where To Buy

ONLINE DEALERS | DEALER LOCATOR BELOW

DEALER LOCATOR

Build a Mobile Site
View Site in Mobile | Classic
Share by: